Opens in a new tab
Drehverbindungen für industrielle Anwendungen

Slewing Rings

Slewing rings are design elements used as rotary joints in large machines and plants. As versatile, large-diameter rolling bearings, they ensure the simultaneous transmission of axial, radial and tilting moment loads with low friction.

Installation:
Not mounted on a shaft or in a housing like ball/roller bearings, but axially fastened by bolting the rings to the adjacent structure

Mounting positions:
Usually horizontal, but suspended or vertical orientation is also possible

Design:
Single-row → inner and outer ring
Multi-row → up to three rings

Rolling elements guided and separated by cages, cage segments or spacers; sealed raceways with grease lubrication; open design for oil-lubricated systems

Types:
Ball slewing rings
Roller slewing rings
⚠️ Special designs for application-specific requirements

Ball slewing rings

Manufacturing options
(with/without flange, double-row)

– Special dimensions
– Application-related tolerance adjustment

  • Specific gear qualities
  • Individual hole patterns
  • Material adaptations
  • Special sealing systems
  • Application-specific lubricant
  • Coating variants
  • Special cage variants/spacers
  • Specified bearing clearance
  • Painting
Kugeldrehverbindung von KIS Antriebstechnik
Rollendrehverbindung von KIS Antriebstechnik

Roller slewing rings from KIS Antriebstechnik

Manufacturing options
(double-/triple-row)

  • Special dimensions
  • Application-related tolerance adjustment
  • Specific gear qualities
  • Individual hole patterns
  • Material selection
  • Special sealing systems
  • Application-specific lubricant
  • Coating variants
  • Special cage variants/spacers
  • Specified bearing clearance
  • Painting

Ring material

Standard ring materials

– Low-alloy, heat-treatable steels
– Seamless rolled rings, typically:
–> 42CrMo4
–> 50Mn
–> C45

– Temperature application range: –20 °C to +120 °C
-> Short-term up to +150 °C (depending on lubrication and sealing)

Heat treatment and application

Normalised rings: suitable for lightly loaded standard applications
Quenched and tempered rings: higher strength, preferred for slewing rings and gears under high loads

Special materials for demanding environments

  • Stainless steel (e.g. martensitic chromium steel 1.4034) → high humidity, saline atmosphere
  • Hardened steel alloys → increased wear resistance
  • Case-hardened or nitrided steels → improved surface hardness
  • Steels for cryogenic applications → extremely low temperatures

KIS offers material solutions tailored to application-specific requirements.

Ringmaterial für Kugel- und Rollendrehverbindungen
Käfig und Distanzstücke einer Drehverbindung

Cage and spacers

Function

  • Separation and even spacing of the rolling elements
  • Reduction of friction and wear by preventing direct contact between the rolling elements
  • Ensuring defined raceway kinematics

Plastics (PA6, PA1010, PVC)

  • lightweight, corrosion-resistant, cost-effective
  • Application range: ≤ 70 °C, low to medium loads

Brass

  • High dimensional stability, good sliding properties, temperature-resistant
  • Suitable for > 70 °C, medium to high loads

Steel

  • very high strength and stiffness
  • for extreme loads and demanding operating conditions
  • Injection moulding (plastics): suitable for large series, complex geometries
  • Turning/milling (metals): high precision, suitable for small series
  • Stamping/bending (sheet metal cages): cost-efficient for series production, robust design
  • Temperature and media resistance
  • Weight and mass inertia
  • Wear and friction behaviour
  • Noise generation during operation
  • Service life depending on lubrication and load profile
  • Application-specific design of cages and spacers
  • Adaptation of geometry, material and manufacturing process
  • Development of special solutions for demanding loads and ambient conditions
Oberflächenlösungen und Beschichtungen für Drehverbindungen

Surface solutions

Surface solutions in accordance with DIN EN ISO 12944 – including corrosion protection coatings, preservation and customer-specific painting (RAL or colour palette)

Corrosivity category Environment description Corrosivity level
C1 Dry indoor areas Very low, not aggressive
C2 Indoor areas with occasional humidity / sheltered outdoor areas Low to moderately aggressive
C3 Industrial atmosphere, urban outdoor climate Moderately aggressive – indoor/outdoor
C4 Chemically polluted industrial areas / coastal areas with low salinity High
C5 (industrial) Aggressive industrial atmosphere with high humidity Very high, highly aggressive
C5 – M (marine) Coastal and offshore areas with high salt concentration Very high, highly aggressive, marine organisms

Hardening and performance of raceways

The rings are manufactured from alloyed, quenched and tempered steel. The raceways are precision-machined and induction-hardened to ensure maximum load-carrying capacity and a long service life.

  • Surface hardening is one of the decisive factors for the functional reliability and service life of a slewing ring.
  • Hardness achieved: min. 55 HRC, which ensures high wear resistance under rolling contact loads.
  • The effective hardening depth is defined by the maximum shear stress according to Hertzian contact theory and the size of the rolling elements.
  • Due to the induction hardening process, each raceway contains a soft zone – an unhardened section between the start and end of hardening. This zone is unavoidable for process reasons but is taken into account in the design to ensure operational reliability
Gehärtete Laufbahnen für hohe Leistungsfähigkeit der Drehverbindung
Verzahnung einer Drehverbindung – Innen- und Außenverzahnung

Gearing

  • Straight, helical or special gearing
  • Gear hardness: either normalised (base material) or induction-hardened
  • Hardening mainly at tooth root/flanks, depending on module size
  • Surface hardness: 55±4 HRC, with optimised depth to prevent pitting and tooth breakage
  • Runout accuracy can be influenced by machining and heat treatment
  • Max. runout deviation marked by 3 coloured teeth
  • Middle tooth = maximum deviation
  • Higher profile and flank accuracy → improved tooth geometry, resulting in smaller deviations in pitch and runout
  • Reduced surface roughness (Ra, Rz) → less friction, lower noise emission
  • Improved load distribution across the tooth flanks → lower risk of local stress peaks and premature wear
  • Increased transmission accuracy
  • Lower backlash fluctuations
  • Extended service life
  • Better compatibility with hardened surfaces
  • Well suited for moderate loads and speeds
  • Accurate tooth profiles for precise power transmission
  • Robust surface finish
  • Usable without tooth corrections
  • Flexibility in geometry
  • Cost-efficient solution for standard applications
Vielseitige Tragfähigkeiten von KIS Drehverbindungen

Versatile load-carrying capacities

  • Application-specific raceway profiles for complex load spectra
  • Optimised hardening depth based on Hertzian contact theory
  • Robust cross-section design ensures reliable absorption of any load
  • Large diameter combined with multi-row design offers high resistance to tilting moments
  • Can be designed for high load safety factors
  • Precise finishing
  • Special design for suspended applications
  • Manufactured with optimised flatness and runout accuracy
  • Reduced bearing clearance (axial/radial) or with precisely defined preload

Complete solutions

Application-specific assemblies:

  • Slewing ring
  • Pinion
  • Lubrication solution
  • Sealing systems
  • Fastening solutions
  • Surface protection
  • Integration of sensors
  • Connecting elements (e.g. pre-assembled steel frames and structures)
  • Turnkey assembled modules
  • Refurbishing service
Komplettlösungen für Drehverbindungen von KIS
Berechnung des genauen Durchmessers von Drehverbindungen

80 % of all bearing failures are due to lubrication problems

The aISO extension of the rating life equation (ISO 281) takes into account:

  1. Lubrication quality: viscosity, depending on temperature (𝜿)
  2. Cleanliness of the lubricant (𝒆𝒄)
  3. Material quality and internal design (𝑪𝒖)

This makes the classic L10 rating life (load-based only) more practice-oriented, since 80 % of all bearing failures are due to lubrication/contamination.

20% unsuitable lubricant

20% aged lubricant

15% insufficient quantity

20% solid contamination

5% liquid contamination

KIS expertise

The KIS design department develops customised slewing systems for the most demanding applications. All designs are created according to customer requirements in compliance with international standards and regulations:

  • Validation of rating life according to ISO TS 16281
  • Validation of bolts according to VDI 2230
  • Validation of gears according to ISO 6336

Depending on the application, advanced calculation and simulation methods are applied to evaluate the following:

  • Load distribution in rolling elements (including pressure distribution on rollers)
  • Stress levels in rings and interfaces
  • Deformations and stiffness of the overall model
  • Contact pressures and safety factors in raceways
  • Calculation of bearing rating life for each row and the entire system
  • (ISO 16281)
  • Dimensioning and verification of gears and bolted connections
  • Consideration of bolt preload and the effects of load fluctuations
  • Definition of bearing ring geometry (polygonal cross-sections)
  • Application of loads to surfaces or individual points
  • Evaluation of geometric tolerances and alignment sensitivity
  • Calculation of friction torque
  • Evaluation of the lubrication concept
  • Safety against fatigue and wear
  • Corrosion protection concepts
  • Adaptation to extreme ambient conditions
  • …
Chargenrückverfolgbarkeit bei KIS Drehverbindungen

Batch trace­ability

Seamless Product Lifecycle Management (PLM) makes it possible to ensure continuous monitoring of quality standards as well as seamless control of production and process flow. Each bearing type is assigned a unique identification number (ID) that is permanently linked to all relevant manufacturing and material data.

In addition, comprehensive batch traceability ensures that every component and every material batch can be uniquely identified, tracked and documented across the entire value chain – from raw material input, through heat treatment and machining, to final assembly. This enables precise root cause analysis in the event of deviations, full compliance with quality audits and guarantees our customers process transparency.

By combining ID-based product identification with batch documentation, we achieve maximum traceability, reduce risks in the supply chain and offer our customers a verifiable basis for long-term operational safety and reliability.

  1. Standardised marking with a permanent type plate
  2. Alternative: direct laser engraving for permanent marking
  3. Customer-specific labelling to secure your spare parts business

Street sweepers for urban use

Typical product: ball slewing ring, ungeared
Outside diameter: 350 mm – 500 mm

  • Fe/ZN25/Cr3+ coating against corrosion with tightly toleranced layer thickness
  • Tighter tolerances for internal clearance
  • Grease optimisation for longer service life
  • Customer-specific hole pattern
  • Precise coaxiality of the bolt circle
  • Groove on the inner ring for pressure-tight shaft seal
  • Inner ring groove for anti-rotation lock
  • Optimised internal geometry
  • Individual relubrication options through application-specific
  • lubrication holes

Heavy-duty mobile crane

Typical product: ball slewing ring, ungeared
Outside diameter: 800 mm – 1,500 mm

  • Strictly controlled tilting clearance
  • Optimised sealing system for demanding external conditions
  • Optimised internal geometry
  • Customised hole pattern including fastening holes
  • for easier assembly
  • Application-specific spacers for rolling elements
  • Strictly controlled bearing clearance
  • Special external geometry, 100 % pre-lubricated with defined
  • lubricant

Sweeper-blower for airports

Typical product: ball slewing ring, externally geared
Outside diameter: 500 mm – 1,000 mm

  • Application-specific gear module
  • Special design (external geometry)
  • Strictly controlled axial and radial clearance
  • Application-optimised lubricant
  • Lightweight design through reduced cross-section

Mobile cranes and aerial work platforms

Typical product: ball slewing ring, externally geared
Outside diameter: 500 mm – 1,500 mm

  • Customised gear module
  • Customer-specific coating in RAL colour
  • Strictly controlled axial and radial slewing ring clearance
  • Strictly controlled flatness and runout deviation
  • Optimised internal geometry
  • Optimised sealing lip system
  • Customised hole pattern

Articulation systems for buses

Typical product: four-point contact bearing, ungeared
Outside diameter: 500 mm – 1,200 mm

  • Lightweight design through reduced cross-section
  • Four-point contact design for high stiffness and
  • load-carrying capacity, operational safety, longer service life
  • Optimised sealing lip system
  • Strictly controlled axial and radial clearance
  • Specific lubricant for longer service life
  • Customised hole pattern for easy maintenance

Do you have questions about our products? Our team of experts will be happy to advise you.

Contact us